DIN1.STATE TO DIN7.STATE

Description

Reads the state of one digital input according to the number identified in the command.


  • AKD-N only supports DIN1 to DIN3.

General Information

Type

R/O Parameter

Units

N/A

Range

0 to 1

Default Value

N/A

Data Type

Integer

Start Version

M_01-00-00-000

Variants Supported

Variant Supported
AKD Base Yes
AKD with Position Indexer Yes
AKD EtherCAT Yes
AKD CANopen Yes
AKD BASIC Yes
AKD SynqNet Yes*
AKD EtherNet/IP Yes
AKD PROFINET Yes
AKD Sercos® III Yes
AKD-N Yes
AKD-C No

*In SynqNet, a parameter may be available in the firmware but have no effect on the system. See SynqNet Supported Parameters.

Fieldbus Information

If your drive type is listed as supported but no index, address, or instance number is listed, then this parameter is accessible through WorkBench, but not over your fieldbus type. For information on SynqNet parameters see SynqNet Supported Parameters.

PROFINET and Sercos® III
Parameter Fieldbus Address Attributes Signed?
DIN1.STATE

PROFINET

2064 Byte No
Sercos® III 2 Octets
DIN2.STATE

PROFINET

2069 Byte
sercos® III 2 Octets
DIN3.STATE

PROFINET

2074 Byte
Sercos® III 2 Octets
DIN4.STATE

PROFINET

2079 Byte
Sercos® III 2 Octets
DIN5.STATE

PROFINET

2084 Byte
Sercos® III 2 Octets
DIN6.STATE

PROFINET

2089 Byte
Sercos® III 2 Octets
DIN7.STATE

PROFINET

2094 Byte
Sercos® III 2 Octets
EtherNet/IP
Parameter Instance Data Size Data Type
DIN1.STATE 65 1 Byte Integer
DIN2.STATE 70
DIN3.STATE 75
DIN4.STATE 80
DIN5.STATE 85
DIN6.STATE 90
DIN7.STATE 95
Modbus
Parameter Register Address Is 64 bit? Attributes Signed? Object Start Version
DIN1.STATE 128 No 8 bit No M_01-03-00-000
DIN2.STATE 138
DIN3.STATE 148
DIN4.STATE 158
DIN5.STATE 168
DIN6.STATE 178
DIN7.STATE 188

Related Topics

Digital Inputs and Outputs